Servo motor

  • 400 VAC, 900 W
  • 130mm flange, 19mm shaft, 2.96/8.59Nm, 3000/5000rpm
  • Absolute 19 bit multi turn encoder (524288 ppr)
  • Low inertia
  • Brake


General description

Article number 71241
Warranty 1 year
Applicable drive L7xB010-4


Inertia 5.659 kg•cm²
Flange size 130 mm
Shaft diameter 19 mm
Shaft type Keyed
Maximum shaft axial force 725 N
Maximum shaft radial force 362 N
IP Class IP65 (exkluding shaft penetration)
Weight 6.6 kg

Ambient conditions

Environment Avoid direct sunlight, no corrossive gas, inflammable gas, oil mist or dust
Humidity 90% RH or less (no condensation)
Temperature range Operating: 0 to 40 C°, Storage: -10 to +60 C°
Vibration 5G


Holding brake Yes
Holding torque 10.4 Nm
Brake coil voltage 24 VDC
Brake coil current 0.81 A


Encoder type Absolute multi-turn 19bit (524288ppr)

Output ratings

Rated power 900 W
Rated speed 3000 rpm
Rated torque 2.96 Nm
Maximum torque 8.59 Nm


Allowed load inertia ratio 10 times motor inertia

Standard compliances

Applied directives EMC Directive: EN 60034-1:2010 Low Voltage Directive: EN 60034-5:2001 + A1:2007


Limited availability


Servo motor

EOL - End Of Life:

LTB - Last Time Buy:

LTD - Last Time Delivery:

LTR - Last Time Repair:

Replacement Parts: