Servo motor

  • 230 VAC, 100 W
  • 40mm flange, 8mm shaft, 0.32/0.96Nm, 3000/5000rpm
  • Absolute 18 bit multi turn encoder (262144 ppr)
  • Low inertia
Contact Print (PDF)


General description

Article number 71131
Warranty 1 year
Applicable drive L7xA001-2


Inertia 0.0023 kg•cm²
Flange size 40 mm
Shaft diameter 8 mm
Shaft type Smooth
Maximum shaft axial force 39 N
Maximum shaft radial force 148 N
IP Class IP65 (exkluding shaft penetration)
Weight 0.8 kg

Ambient conditions

Environment Avoid direct sunlight, no corrossive gas, inflammable gas, oil mist or dust
Humidity 90% RH or less (no condensation)
Temperature range Operating: 0 to 40 C°, Storage: -10 to +60 C°
Vibration 5G


Holding brake No
Holding torque 0.32 Nm
Brake coil voltage 24 VDC
Brake coil current 0.25 A


Encoder type Absolute multi-turn 18bit (262144ppr)

Output ratings

Rated power 100 W
Rated speed 3000 rpm
Rated torque 0.32 Nm
Maximum torque 0.96 Nm


Allowed load inertia ratio 30 times motor inertia

Standard compliances

Applied directives EMC Directive: EN 60034-1:2010 Low Voltage Directive: EN 60034-5:2001 + A1:2007
Limited availability


Servo motor

EOL - End Of Life:

LTB - Last Time Buy:

LTD - Last Time Delivery:

LTR - Last Time Repair:

Replacement Parts: