IX otf and ttf fonts

​23.11.2022
IX developer 2.40Sp7

X2 terminals (actually windows CE \ wec2013 ), do not support the newer OTF font standard ( OpenType Font) . Only TTF ( true type font) are supported for terminal targets, however on a PC RT ( Run Time ) you can use OTF. 

It is possible to convert a OFT font to TTF: https://cloudconvert.com/otf-to-ttf

iX Developer SP7 - 2.47.473 Release information

• iX240SP7 LastMinuteNotes iX PIEN341L.pdf.pdf
• iX240SP7 ReleaseNotes iX PIEN340Q.pdf.pdf

Driver MODICON Modbus Slave: Command XDNCW

Windows CE versions, X2, iX, E1000

• WindowsCE_X2_iX_E1000_.xlsx

Creating a custom Welcome Screen \ startup screen on a X2 pro operator panel

​27.05.2020
X2 series

Place the desired splash picture in the projects "project files" folder.
The picture must be a .bmp file, with the exact screen size as the terminal.
FIlename:  iXCustomSplash.bmp

After the download of the project, this picture will be used as splash screen .

iX - SMTP - Using Gmail servers using App password

​​​Google has dropped the support for "less secure apps" and no longer supports the use of third-party apps or devices which ask you to sign in to your Google Account using only your username and password.

From now on an "App Password" is required when sending emails from iX panels that are configured to use Gmail's SMTP servers. Please notice that 2 step verification is required in order to create an app password. 

Create and use App Password

1. Login to you Google account.
   
2. Make sure 2-Step Verification is enabled.
   
   
3. Generate an App password. Select "Mail" as app and for device select "Other" and enter a custom name. Click Generate to get an app password.
   
   
4. Then use the following settings for the email device in the iX application
   
   From Email Address: [Gmail address]
   SMTP Server: smtp.gmail.com
   Port: 587
   Encryption Mode: ExplicitSSL
   Authentication Mode: AuthLogin
   Username: [Gmail address]
   Password: [The App Password]
   
   
   

• Set gmail App password .pdf

How to download Free software packages from SmartStore

​This document provides guidelines for customers when downloading free software and firmware packages from SmartStore. The following chapter describes the procedures of:

• How to download Free software packages from SmartStore - EXTERNAL_2023.08.08.pdf

OPC ua settings in Phoenix plxnext engineer

​04 october 2022
To use IX OPC client with Phoenix PLC's some settings are needed in the PLxnext engineering tool:
Basic settings "Visibility of variables" = "Marked"
(see attacment for screenshots)

Subject1 = HMI ip adress
UNcheck "Use the thruststore for client authentication" AND " Check application URI against client certificate. 

To get the NS ( namespace ) settings in IX developer correctly, the easiest way is to browse the Phoenix server from IX developer, by clicking the small down arrow at the right side of the "ADD" button in Tags, and select "Add tags from OPC server" . Then the nemespaces are set automaticly. Otherwise you can see them in the screenshot below:
 

• phoenix_OPCUA.docx

Image Sticking

When utilizing TFT LCD HMI panels in applications where a fixed or partially fixed image remains displayed on the screen for extended periods of time, users may experience a phenomenon referred to by the LCD industry as Image Sticking. Image Sticking - sometimes also called "image retention" or "ghosting"- is a phenomenon where a faint outline of a previously displayed image remains visible on the screen when the image is changed.

Image sticking can be caused by:

• Static images
  
• No Screensaver
  
• Sharp contrast transition (e.g. black / white)
• High ambient temperatures
  

• Use the screensaver functionality.
  
• Changing constantly  between static and dynamic images
• Avoid excessive brightness differences between foreground and background elements
• Use colors with similar brightness
• Use complementary colors in follow-up images
  

Best Practice Database on SD card or flash memory

​This document provides recommendations for how to setup and use the X2 HMI panel in the best way to reduce unnecessary wear on the flash memory.

For more information: Best Practice Image update for X2 pro, X2 marine and BoX2 pro 2.1 HF

• MAEN360.pdf

Quick start guide, Disable / Suppress Flashwear warning dialogue on X2 series SUEN00411

​30.01.2023
X2 series 

This Document describe how to enter the service menu, go to settings in the diagnostics part, and supress the flash wear warning message.

• SUEN00411 Suppress FlashWear warning .pdf

Max number of recipe items / tags

iX developer 2.40 SP7

The help file states that maximum 256 recipe items can be used. This is wrong, maximum number of recipe items / tags / columns is 998. 
When attemting to add more, iX will display a popup with an error message.

Convert from Exter/E1000 To X2 Series

The Mitsubishi E-Series hardware products and E-Designer software have been manufactured by Beijer Electronics for Mitsibishi for many years. In 2015, this partnership ended. Beijer-branded E1000 HMIs are now orderable directly through Beijer or one of its authorizated distributors. As your Mitsubishi terminals need to be replaced, Beijer provides a smooth transition by offering three paths:

Direct Replacement Path (E1000 panels) - A direct hardware and software replacement for most E1000 panels. The Beijer-branded E1000 panels are identical to the Mitsubishi-branded E1000 panels, only the rear labeling is different.

Direct Replacement Path (EXTER panels) - A direct mechanical drop-in hardware replacement is available for most E1000 products. The replacement products use your existing E-Designer applications after a simple project conversion to Information Designersoftware, a service offered by Beijer Technical Support

Upgrade Replacement Path (X2 panels) - Enhance your future HMI offering with modern X2 hardware and state-of-the-art iX Developer software including graphics, scripting, alarms, recipes, remote access and multiple communication drivers. iX Developer supports and integrated E-Designer to iX Developer project conversion feature (as well as Information Designer to iX Developer).

The following is a comparison chart of the older, discontinued E-series/CIMREX HMI panels to the current E1000/EXTER HMI panels, as well as the closest versions to Beijer''s latest X2 panels.

1 The Beijer-built E-series models were branded for Mitsubishi. The CIMREX models were the Beijer-branded versions of the early E-series models. All were discontinued a number of years ago.

2 The E1000 models are upgrades from the older, discontinued E-series models. Historically, the Beijer-built E1000 models were branded for Mitsubishi, but now carry a Beijer brand. The E1000 are now only available from Beijer or an authorized distributor; they are no longer available from Mitsubishi. E1000 programming is based on E-Designer software which can now only be obtained from Beijer.

3 The Beijer-built and branded EXTER models are virtually identical to the E1000 models. EXTER programming is based on Information Designer software. Beijer Technical Support can convert an E-Designer program to an Information Designer program, if required.

4 X2 models are not 100% replacement models for the E1000 or EXTER models. They have different form-factors; there are no X2 Keypad models; all X2 models have color displays. These X2 models are the closest versions to the E1000/EXTER panels. X2 pro models have more memory and faster processors than the X2 base units. iX Developer can import an E-Designer or Information Designer project to run on X2 models, though it may not import 100% of the functionality.

5 Adapter plates enable a smaller footprint EXTER or E1000 HMI to fit in the space occupied by a slightly larger, discontinued Exxx or CIMREX model. Note: Adapter Plates allow most E1000/EXTER models to fit the cut-outs used by the discontinued E-series/CIMREX models.

6 X2 series are Beijer main iX models. See the EOL Notifications for details.

X2 image - Update EBOOT require SD card to be formatted to FAT16/FAT32

Some versions of the system program to X2 require the EBOOT to be updated as well. The EBOOT is included when you create "Recovery SD" from the Image Loader. Please note that the SD card must be formatted to FAT16/FAT32 otherwise the EBOOT will not be updated even though the "Make Recovery SD Card" setting was enabled.
The file system exFAT is not supported when upgrading the EBOOT.

The EBOOT version can be verified in the diagnostics which can be opened from the service menu.

Nexto Xpress - Program example CANopen X2 Extreme as slave device

​BCS-XP325 (CANopen manager) <---> X2 Extreme 12 HP (CANopen slave)

BCS Tools 3.30, XP325 firmware 1.9.17.0
iX Developer 2.40 SP4, image 2.0 b368, CANopen driver 5.04.00

COM B in use with cable CAB112 (built-in CAN port)

• X2CanOpenSlave_iX240SP4.zip
• Xpress_X2CanOpenSlave_BCS330.projectarchive

Viewing angle X2 series

​

BCS Tools - SFC errors at compile

​Affected versions:
3.50, 3.51, 3.52
Will be solved in 3.60

Affected devices:
All devices in BCS Tools with <SP17 runtime.
BoX2 SC all variants
X2 control all variants
GL-99xx all variants
GN-93xx all variants

The reason for this is due to compatible issue between the runtime version implemented in the device and the version of the SFC library.

Workaround
Change the version in use to an older version according to the attached pictures.

• Screenshots_SFC.pdf

Copy Debug log to accessible folder

• CopyDebugLog.zip

X2 Date time picker script

​02.02.2023
X2 series.

This sample project let the user select a date and time from a calendar type of object and stores\presents the selected date/time in various formats in Global tags.

• X2_DateTimepicker.zip

IX alarm info request lookup in pdf by page index

​31.08.2021
IX developer 2.40 SP6
Demo driver

Consept:
This sample project uses An alarms uniq ID to produce an index.
This index is used to show aditional info from a PDF document, regarding the selected alarm, when the user click the Info button. 

 Details:
The Main script is in the alarmserver, and fires with the "AlarmServer_AlarmEventInfoRequested" event.

The index is made from the  the alarm name column (first column in the alarm configurator that normally has no function for us ), which has default values: AlarmItem0, AlarmItem1 etc. 

The script extract the number part 0,1,2 etc to a global tag, to be used as a page index in the PDF viewer object.  Finally the Popup screen is opened.

In the popup screen The Pdf is opened, using the Alarm Taxt as Title,  and the page corresponding to the index is shown.

PS.
If several alarm groups are in use, Each group will default start with the name AlarmItem0. This will make duplicates. So in this case you must manually verify that the number part in the names are uniq, and consistent.   

• AlarmInfoIndexing.zip

Program example iX Developer: Modbus TCP communication between any X2 and BFI-P2/H3.

This is to be found in Smart Engineering, SER0050. Either download the manual further down for SER0050 or the complete Smart Enginnering here.

Program example support:

• Works only towards BFI Frequency inverters BFI-H3 and BFI-P2 
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

​​

• SER0050_QS_ iX to BFI-H3-P2 ModBusTCP_V1.0.0-EN.pdf

Program example iX Developer: Modbus RTU communication between any X2 and BFI-E3, BFI-P2 or BFI-H3.

This is to be found in Smart Engineering, SER0051. Either download the manual further down for SER0051 or the complete Smart Enginnering here.

Program example support:

• Works only towards BFI Frequency inverters BFI-E3, BFI-H3 or BFI-P2 
  
• Start and stop
  
• Change Setfrequency
• Normal-, fast- or coasting-stop
  
• Inverter Alarm Reset
• Constant overview of Drive Outputs-, Alarm-, Safety-, Running Hours status
• Read and Write of all parameters and data available in the inverter
• Read of Drive type, Input voltage, Power, Frame size, Firmware and serialnumber
• Trend 

HMI project created in iX Developer 2.40 SP6.

• SER0051_QS_ iX to BFI ModBusRTU_V1.0.0-EN.pdf

iX Templates for E-key and X-Key

Templates for E-key and X-key, created as popups.

Unzip the *.zip file in < C:\Users\Public\Documents\Beijer Electronics AB\iX Developer 2.40 SP4\Screen Templates > and the templates will be available under “Add Screen”>Templates

Connect an action to the buttons, LED-colourfärg/Led-blink as dynamic if used.

• E_key_popup_X2Pro12.zip
• X_key_popup_X2Pro12.zip

Add Tags to Tagmonitor by script

​25.03.2019
IX dev. 2.40SP1
X2 control 10 (Should work on all platforms)

Attached sample project adds predefined tags to the TagMonitor object, making it easy to switch between  several different sets of tags in the list

• TagMonitor.zip

Quick start guide - Connect X2 HMI with Nexto PLC, SUEN00414

• Connect X2 with Nexto SUEN00414.pdf

Ping from IX x2 terminal

​27.02.02
IX dev. 2.40 SP4

The attached project sample (X2 control 10), Pings a fixt IP adress every 30 sec, and set\rst a global tag accordingly, to show the status of the connection.
All code is in a scriptmodule, initiated by the "created" event.

The actual Ping syntax is: (returns true\false)
if(Core.Api.Service.ServiceContainerCF.GetService<Neo.ApplicationFramework.Interfaces.INetworkService>().Ping("10.0.0.1", 100))

• Ping.zip

iX Developer - Top10 Alarm list, based on count and/or duration

​​You easily implement a Top10 Alarm list in iX.

1. Add a DatabaseViewer control to a screen

2. Add the following script to the screen:

void AlarmScreen_Opened(System.Object sender, System.EventArgs e)
{
DatabaseViewer1.IsControlVisible = false; //Optional, to hide manual controls
}

void btnTop10_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY COUNT(*) DESC,[Duration (s)] DESC","Database.db");
}

void btnTop10Duration_Click(System.Object sender, System.EventArgs e){
string sFrom = "1900-01-01"; string sTo = "2999-12-31";
DatabaseViewer1.SendSelectQuery("SELECT [AlarmItemName], [Text], AlarmItemDisplayName,COUNT(*) AS [Count],SUM(strftime('%s',InActiveTime) - strftime('%s',ActiveTime)) AS [Duration (s)] FROM AlarmServer WHERE ActiveTime >= '" + sFrom + "' AND ActiveTime <= '" + sTo + "' GROUP BY [AlarmItemName],AlarmItemDisplayName,[Text] ORDER BY [Duration (s)] DESC, COUNT(*) DESC","Database.db");
}

• Top10_Alarms.zip

Quick Start Guide, MELSEC FX5U/FX5UC Ethernet to X2 series, SUEN00402

• SUEN00402 - MELSEC FX5U_FX5UC Ethernet to X2 series.pdf

Quick Start Guide, MELSEC Qnn QJ71E71 Ethernet to X2 series SUEN405

​Communication driver in X2: MC Protocol

• MELSEC Qnn QJ71E71 Ethernet - X2 series SUEN00405.pdf

Quick Start Guide, MELSEC iQ-R Ethernet - X2 series SUEN00406

​Communication driver X2: MC Protocol

• MELSEC iQ-R Ethernet - X2 series SUEN00406.pdf

Quick Start Guide, MELSEC QnUDE Ethernet to X2 series, SUEN00403

​Communication driver X2: MC Protocol

• SUEN00403 - MELSEC QnUDE Ethernet to X2 series.pdf

X2 control / X2 marine SC / X2 extreme SC / BoX2 pro SC / BoX2 extreme SC with CODESYS (all image versions) - Startup, recommendations and limitations (SUEN00392)

​The attached document provides important information when working the Beijer Electronics X2/BoX2 series range of products with embedded CODESYS control

Note!
BCS Tools 3.30 and newer is the supported and common software platform and shall be used for X2/BoX2 and G-series as well as the Nexto range of products.

Please visit https://smartstore.beijerelectronics.com/

More details can be found in SUEN00392

• X2_BoX2 series with Codesys – Recommendations and limitations SUEN00392E.pdf

​​MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

​​​MTBF Summary X2 pro, X2 control, X2 motion, X2 marine

• MTBF Summary X2 pro, X2 control, X2 motion, X2 marine.pdf

X2 export control and dual use

• X2 Export Control and Dual Use_B2.pdf

X2 Letter of Volatility

​​​X2 Letter of Volatility

X2 base, X2 pro, X2 marine, X2 control, X2 motion

• X2_letter of volatility .pdf

Battery test summary - X2 extreme

• Battery Test Summary BR2330A.pdf
• Battery Test Summary BR-2477A.pdf

Environmental Impact Report X2 extreme

​Environmental Impact Report X2 extreme

• Environmental Impact Report X2_extreme_rev3.pdf

MTBF summary X2 extreme

​MTBF summary X2 extreme

• MTBF Summary - X2 extreme_V2.docx

DoC ECCN for X2 series HMI

• Declaration of conformity ECCN X2 2021-04-30.pdf

​SDoC Green Passport

​SDoC Green Passport

X2 pro, X2 control, X2 motion, X2 marine

• SDoC Green Passport X2 pro, X2 control, X2 motion, X2 marine(PROD CERT - 1164496 - 1 - A1) - 1.pdf

RoHS and REACH Declaration of Conformity

• RoHS and Reach Declaration of Conformity Beijer Electronics AB (PRODCERT - 2083745 - 1 - A1) - 1.pdf

Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

​Environmental Impact Report X2 pro, X2 marine, X2 control, X2 motion

• Environmental Impact Report X2_rev4.pdf

DNVGL Type Approval Certificate X2 extreme sealed

​DNVGL Type Approval Certificate X2 extreme sealed

• DNVGL Certificate_X2 extreme_Sealed (PROD CERT - 1329944 - 1 - A1) - 1.PDF

DNVGL Type Approval Certificate X2 extreme

​DNVGL Type Approval Certificate X2 extreme

• DNVGL Certificate_X2 extreme_Panel Mount (PROD CERT - 1324411 - 1 - A1) - 1.PDF

ABS Type Approval Certificate X2 extreme sealed

​ABS Type Approval Certificate X2 extreme sealed

• ABS Certificate_X2 extreme_Sealed_Variants_18-SQ1704662-PDA-DUP (PROD CERT - 1293395 - 1 - A1) - 1.PDF

ABS Type Approval Certificate X2 extreme

​ABS Type Approval Certificate X2 extreme

• 22-2286205-PDA-DUP cert_133810723.pdf
• ABS Type approval.pdf

LR Type Approval Certificate X2 extreme

​LR Type Approval Certificate X2 extreme

• LR23299349TA - Cert - Version1 - Signed.pdf

LR Type Approval Certificate X2 extreme sealed

​LR Type Approval Certificate X2 extreme sealed

• X2 Extreme Sealed - LR Type Approval (LR23389570TA - Cert - Version1 - Signed).pdf

Compass safe distance X2 extreme

​Compass safe distance X2 extreme

• Compass safe distance X2 extreme.pdf

X2 extreme (SC) / X2 extreme sealed (SC) / BoX2 extreme (SC), CE manufacturer declaration

​CE manufacturer  declaration X2 extreme x2 extreme sealed box2 extreme

• DoC CE EMC ROHS Declaration of confromity X2 extreme Variants 10052021.pdf

X2 extreme (SC) / BoX2 extreme (SC), CCC ex-zone

CCC ex-zone

• SKM_658e21060218140.pdf
• SKM_658e21060218150.pdf
• SKM_658e21060218151.pdf
• SKM_658e21060218152.pdf
• SKM_658e21060218153.pdf
• SKM_658e21060218160.pdf

Manufacturer declaration: X2 extreme UKCA Declaration of Conformity

​Manufacturer declaration: X2 extreme UKCA Declaration of Conformity

• X2 extreme UKCA Declaration of Conformity.pdf

IECEx Certificate X2 extreme (SC) / BoX2 extreme (SC)

• IECEx_UL_17.0058X_1.pdf

CCS Type Approval Certificate X2 extreme sealed

​CCS Type Approval Certificate X2 extreme sealed

• CCS Certificate HK17T00011_X2 extreme_Sealed_Variants (PROD CERT - 1390963 - 1 - A1) - 1.PDF

CCS Type Approval Certificate X2 extreme

​CCS Type Approval Certificate X2 extreme

• CCS Certificate HK17T00007_X2 extreme_panel_mount_variants (PROD CERT - 1266795 - 1 - A1) - 1.PDF

CE, EMC, ROHS Manufacturer declaration X2 extreme and X2 extreme sealed

​CE/ROHS Declaration of  Conformity X2 extreme and X2 extreme sealed

• DoC CE, EMC, ROHS Declaration of Conformity - X2 extreme Panel Mount and Sealed Variants (PROD CERT - 1257972 - 1 - A4) - 1.pdf

ATEX Certificate X2 extreme, X2 extreme sealed, Box2 extreme

​ATEX Certificate X2 extreme, X2 extreme sealed, Box2 extreme

• X2 extreme (Panel, Sealed, BoX2) - ATEX Type Examination Certification (PROD CERT - 1286939 - 1 - A2) - 1.PDF

BV Type Approval Certificate X2 extreme

​BV Type Approval Certificate X2 extreme

• 50067_B0 BV.pdf

BV Type Approval Certificate X2 extreme sealed

​BV Type Approval Certificate X2 extreme sealed

• 51497_B0 BV.pdf

​CCS Marine Certificate X2 extreme, pro, control, marine

​CCS Marine Certificate X2 extreme, pro, control, marine

• CCS certificate 2022.pdf

KR Type Approval Certificate X2 extreme sealed

​KR Type Approval Certificate X2 extreme sealed

• KR TAC_X2 extreme_Sealed_Variants (PROD CERT - 1320616 - 1 - A1) - 1.PDF

KR Type Approval Certificate X2 extreme

​KR Type Approval Certificate X2 extreme

• KR TAC_X2 extreme_Panel_Mount_Variants (PROD CERT - 1288975 - 1 - A1) - 1.PDF

NKK Type Approval Certificate X2 extreme sealed

​NKK Type Approval Certificate X2 extreme sealed

• NKK certificate X2 extreme sealed 2022 (PROD CERT - 1856414 - 1 - A1) - 1.pdf

NKK Type Approval Certificate X2 extreme

​NKK Type Approval Certificate X2 extreme

• NKK Certificate_X2 extreme_Panel_Mounts_Variants_17A021 (PROD CERT - 1264758 - 1 - A2) - 1.PDF

X2 extreme (SC) / BoX2 extreme (SC) update IECEx ATEX 2021

​update IECEx  ATEX 2021

• DEMKO 17 ATEX 1900X Rev. 4.pdf
• IECEx UL 17.0058X 004.pdf

DNV Type Approval Certificate X2 Extreme SL

​DNV Type Approval Certificate X2 Extreme SL

• TAA00001WE-revision2.pdf

CE Certificate X2 extreme 15 SL HP SC

​CE Certificate X2 extreme 15 SL HP SC

• T170912D05-A-E _X2 extreme 15 SL HP SC_ CE Verification (PROD CERT - 1264988 - 1 - A1) - 1.PDF

FCC Certificate X2 extreme 15 SL HP SC

​FCC Certificate X2 extreme 15 SL HP SC

• T170912D05-A-F _X2 extreme 15 SL HP SC_ FCC Verification (PROD CERT - 1264989 - 1 - A1) - 1.PDF

Cable CAB113: Cable for ModBus RS485 between X2 panel and BFI

• 6222S1.pdf

Outline drawings, X2 extreme 7, 12, 15

​Outline drawings, X2 extreme 7, 12, 15

• extreme12 outline_DDOC-00029A.PDF
• extreme12 outline_DDOC-00029A_HP.DWG
• extreme12 outline_DDOC-00029A_HPS.DWG
• extreme15 outline_DDOC-00030A.PDF
• extreme15 outline_DDOC-00030A_HP.DWG
• extreme15 outline_DDOC-00030A_HPS.DWG
• extreme7 outline_DDOC-00028A.PDF
• extreme7 outline_DDOC-00028A_HP.DWG
• extreme7 outline_DDOC-00028A_HPS.DWG

Cutout drawings, X2 extreme 7, 12, 15​

Cutout drawings, X2 extreme 7, 12, 15​

• X2 extreme 12_all_Cutout Drawing.PDF
• X2 extreme 15_all_Cutout Drawing.PDF
• X2 extreme 7_all_Cutout Drawing.PDF

CAB153 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

RS422 panel side termination plug​
Used when RS422 point to point communication is used 

CAB150 Cable Drawing for X2 base, X2 pro, X2 marine, X2 control, iX Panel TxA/B/C operator panel

​3 way splitter cable
Used when 2xRS485 are needed

• CSS-DWG-1509005 100-0526 CAB150.pdf

CAB101 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

CAB101 Cable between MELSEC Q and  X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB101_3m.pdf

CAB100 Cable Drawing for X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C operator panel

Cable between GE Fanuc and X2 base, X2 pro, X2 marine, X2 control, X2 motion, iX Panel TxA/B/C

Cable length: 3 meters.

• CAB100_3m.pdf

3D drawing, X2 extreme 15 (standard, high-performance and fully sealed versions) in STEP format

​3D drawing, X2 extreme 15 (standard, high-performance and fully sealed versions) in STEP format

• T15BR2_FinalAssy_3D_geometry_AP214.STEP
• T15BR2_Sealed_FinalAssy_3D_geometry_AP214.STEP

iX Developer Reference Manual, MAEN355 rev. B (current version)

• iX250 ReferenceManual MAEN355B.pdf.pdf

X2 base / pro / extreme / marine / control - Configuration and Image manual , MAEN352 rev B

MAEN352B: describes the X2 series system program V2.2 and later . 

This manual replaces MAEN205 rev. G

• X2_Configuration_and_Image_Manual_MAEN352B_2023-06-07.pdf

​New manuals for protection class ec

New manuals for protection class ec​

• X2_extreme_12_CO_MAEN323B_English.pdf
• X2_extreme_12_HP_MAEN256B_English.pdf
• X2_extreme_12_MAEN255B_English.pdf
• X2_extreme_15_CO_MAEN310B_English.pdf
• X2_extreme_15_HP_MAEN261B_English.pdf
• X2_extreme_15_MAEN260B_English_new.pdf
• X2_extreme_7_12V_CO_MAEN311B_English.pdf
• X2_extreme_7_12V_MAEN250B_English.pdf
• X2_extreme_7_CO_MAEN312B_English.pdf
• X2_extreme_7_HP_MAEN251B_English.pdf
• X2_extreme_7_HP_web_MAEN338B_English.pdf
• X2_extreme_7_MAEN249B_English.pdf

X2 Extreme CO Manuals

​X2 Extreme CO Manuals

• X2_extreme_12_CO_MAEN323_English.pdf
• X2_extreme_15_CO_MAEN310_English.pdf
• X2_extreme_7_CO_MAEN312_English.pdf

​Guidelines for TxA and TxB migration to X2.

​​Guidelines for TxA and TxB migration to X2.

• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pdf
• iX TxA and iX TxB to X2 migration guidelines 2016-08-25.pptx

MTBF X2 extreme

​MTBF X2 extreme

• MTBF Summary - X2 extreme_V2.docx

SqlProxy - Connects iX Panels transparently to SQL Server

​There's sometimes a need to connect to SQL Server from an iX Panel.
In CE6 based panel, this has been possible using sqlclient.

Nothing similar is however supported in CE8 (most X2 panels).

During the years, we have helped customers creating solutions based on SQL Server connectivity.
There is a need to be able to move such an application to X2 aswell with minimal change of script code.

One solution is "SqlProxy" that is presented in the attached pdf file.
​
Download:
https://www.beijerelectronics.com/en/support/Help___online?code=4D4C0877-4291-43C8-BA7B-54A456B0B5FE
Install in e.g. C:\Users\Public\SqlProxy to avoid access right issues!

October 16, 2019: The file SqlProxy_191016C.zip contains CURRENT VERSION !
SqlProxy 1.1.0.1. Make sure to use corresponding SqlProxy.exe , tcpServer.dll and scmSqlProxy.Script.cs from the same package!
Supports unicode (e.g. Chinese characters and queries like select * from Customers where Name = N'公司黄页' ). Performance improved.

For best performance, limit the amount of data (number of rows and number of columns) to the minimum necessary with your SQL query. Example: "select top (1) createdTime, columnName3, columnName149 from tableName where columnName1 = 'something' order by createdTime desc"
to get just the few interesting columns from the very latest record where columnName1 = 'something'

Furthermore, for best performance, use StringBuilder when receiving reply from SqlProxy instead of += in the iX demo project. scmSqlProxy.Script_StringBuilder.zip in demo project contains this alternate scmProxy.Script.cs file if needed.
Contact support @beijer.se for additional info!

• SqlProxy_161202C.pdf
• SqlProxy_190115.pdf
• SqlProxy_191016C.zip
• SqlProxy_as_service_170330.pdf

Remote Access Viewer v1.5.4, for Exter/E1000 - TxA/TxB/TAxx - X2 panels

Remote Access Viewer is a program for remote access and control Exter/E1000 - TxA/TxB/TAxx - X2 panels.

It is possible to access, reflect and control panels from a PC by using the VNC client program, Remote Access Viewer (freeware), together with the built-in VNC server (Remote Access function) in the iX Panels.

NB: Even though the help file suggests another key combination, please note that Ctrl-Alt-Shift-F toggles Full screen mode on / off best, so you Restore from Fullscreen mode with this key combination! 

vncviewer.exe_patch.zip contains a patched vncviewer.exe

• MA00756.pdf
• RemoteAccessViewerSetup 1.5.4_iX.exe
• vncviewer.exe_patch.zip

FTDI Direct driver demo

​This demo covers the utilization of the FTDI direct driver.

• FTDI_D2XX_Demo (X2 control 12).7z

EDS file for CiX-CAN and X2

EDS_CiX-CAN.zip includes EDS files for the CiX-CAN module:

CiXCANopen.eds                                      General EDS file

CiXCANopen_Default_PDO1.eds              EDS file corresponding to Default Slave PDO setting 1

CiXCANopen_Default_PDO2.eds              EDS file corresponding to Default Slave PDO setting 2

CiXCANopen_Default_PDO3.eds              EDS file corresponding to Default Slave PDO setting 3

CiXCANopen_Default_PDO4.eds              EDS file corresponding to Default Slave PDO setting 4

EDS_X2.zip includes EDS files for the internal CAN on X2 (extreme) panels:

X2CANopen.eds                                      General EDS file

X2CANopen_Default_PDO1.eds              EDS file corresponding to Default Slave PDO setting 1

X2CANopen_Default_PDO2.eds              EDS file corresponding to Default Slave PDO setting 2

X2CANopen_Default_PDO3.eds              EDS file corresponding to Default Slave PDO setting 3

X2CANopen_Default_PDO4.eds              EDS file corresponding to Default Slave PDO setting 4

​

• EDS_CiX-CAN.zip
• EDS_X2.zip

X2 control / X2 extreme SC / X2 marine SC / BoX2 pro SC / BoX2 extreme SC, CODESYS Device XML 3.5.13.30.1 (Current version)

​Device descriptor files for the X2 series, Soft Control editions of HMI and Edge devices. This version is to be used on runtime 3.5.13.30 patch 7 or higher and in conjuction with X2 series images, version 2.0 or higher. Link to image 2.0 b368

• v3.5.13.30.1.zip

X2 series (German)

​36-page brochure incl. general and product family descriptions, technical data, iX and WARP software descriptions, migration paths, etc.

• BRDE631E - X2 brochure_2019_15aug.pdf

X2 brochure (Spanish)​

X2 brochure (Spanish)​

• BRES631A- X2 brohure_low.pdf

X2 brochure (French)

• BRFR631E - X2 brochure_2019_15aug.pdf

X2 brochure (English), BREN631

​​36 page brochure incl. general and product family descriptions, technical data, iX and acirr+ software descriptions, migration paths, etc. Incl. X2 extreme, X2 pro21 and two-year warranty

• BREN631F - X2 brochure_210309.pdf

X2 extreme / BoX2 extreme, image V2.1 build 430

​Image supporting X2 extreme series HMI and devices.

• X2 extreme LastMinuteNotes 2.1.pdf
• X2 extreme ReleaseNotes 2.1.pdf
• X2extremeImageLoader_build430.exe

X2 series Custom Welcome Screen (splash), template

​Template file for customising the Welcome Screen, refer to X2 imagemanual MAEN205.

Custom Welcome screen is supported on X2 base v2 and X2 pro/marine/control/extreme. Currently only X2 base v2 and X2 extreme support customization using this .cfg file and this require the latest versions of the system programs (X2 base V2 v1.02 b280 | X2 extreme v2.1 b430).

• iXCustomSplash.zip

X2 / BoX2 extreme image V2.2 b1041 (Current version)

​Not valid for BoX2 extreme SC and X2 extreme SC

Important! Please note that all firmware files will be moved to smart store. You find this version in this link:  https://smartstore.beijerelectronics.com/en/Firmware/15042/x2-extreme-ver-2-2-b1041

​Related documents:

• x2 extreme v2.2 b1041 image.zip

X2 extreme Image v1.0 B118

• IML_X2extreme_v1.0_build118.exe
• X2 extreme LastMinuteNotes PIEN349A.pdf
• X2 extreme ReleaseNotes PIEN350A.pdf

X2 extreme (SC) /BoX2 extreme (SC) image V2.0 b365

​New release with support for acirro+ (from production only) and eboot update from USB.

• IML_X2extreme_v2.0_build365.exe
• X2 extreme LastMinuteNotes PIEN349E.pdf
• X2 extreme ReleaseNotes PIEN350E.pdf

X2 extreme V1.1 b166

• IML_X2extreme_v1.1_build166.exe
• X2 extreme LastMinuteNotes PIEN349B.pdf
• X2 extreme ReleaseNotes PIEN350B.pdf

X2 extreme (SC) / BoX2 extreme (SC), Hotfix image V2.0 b368 (Current version)

​This is a Hotfix of the current 2.0 release in order to avoid a known issue related to the iX Developer project download process.

Link to related Codesys runtime, 3.5.13.30 Patch7
https://www.beijerelectronics.com/en/support/Help___online?docId=68403 

• IML_TxBR-2_build368.exe
• X2 extreme LastMinuteNotes PIEN349F2.pdf
• X2 extreme ReleaseNotes PIEN350F2.pdf

X2 control / X2 marine SC / X2 extreme SC / BoX2 pro SC / BoX2 extreme SC CODESYS Runtime 3.5.13.30 Patch 7 (obsolete)

​CODESYS Runtime with individual device xml for every single X2 device.

X2/BoX2 series with CODESYS - Recommendations and limitations (SUEN00392)
https://www.beijerelectronics.com/en/support/Help___online?docId=68259

• CODESYS-3.5.13.30_7.zip