GN-9212

Network adapter

  • DeviceNet slave
  • Up to 63 expansion slices
  • 10pt removable terminal block
Contact sales

Facts

General description

Article number 100-8106
Warranty 2 year
Shock operating IEC 60068-2-27 (15G)
Vibration resistence Sine vibration (based on IEC 60068-2-6), 5 ~ 25Hz: ±1.6mm, 25 ~ 300Hz: 4G, Sweep rate: 1 octave/min., 20 cycles, Random vibration (based on IEC 60068-2-64), 10 ~ 40Hz: 0.0125g²/Hz, 40 ~ 100Hz: 0.0125 → 0.002g²/Hz, 100 ~ 500Hz: 0.002 g²/Hz, 500 ~ 2000Hz: 0.002 → 1.3 x 10-4g²/Hz, Test time: 1hrs for each test
Industrial immunity EN 61000-6-2:2005
Installation position Horisontal, Vertical
Product certifications CE, UL, FCC, RoHS, China RoHS, Reach
System power Nominal supply voltage: 24VDC, Voltage range: 60℃: 18~32VDC, 70℃: 18~26.4VDC, Output current limitation: 1.5A, Reverse polarity protection
Power dissipation Max. 70mA @ 24VDC
Current for IO module 1.5A @ 5VDC
Isolation System power to internal logic: Non-Isolation , System power I/O driver: Isolation
Field power Nominal supply voltage: 24VDC, Voltage range: 60℃: 18~32VDC, 70℃: 18~26.4VDC, * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification.
Max current field power contact DC 10A max
Weight 165g
Module size 54x99x70mm

Communication

Station type Slave
Max expansion ports 63 slices
IO data size 128 bytes per slot
Max length bus line Max.100m@500Kbps, , Max. 250m@250Kbps, , Max. 500m@125Kbps
Max network nodes 64 nodes
Baud rate 125Kbps(Max. 500m), 250Kbps(Max. 250m), 500Kbps(Max. 100m)
Settable node address Set by Mac ID
Protocol Poll, Bit-Strobe, Cyclic, COS
Node MAC id setup DIP switch
Terminating resistance setup DIP switch
Bus connection 5 Pin Open-Style Connector
Other serial port RS232 for MODBUS RTU
Serial configuration Node: 1 (Fixed), Baud Rate: 115200 (Fixed), Data bit: 8 (Fixed), Parity bit: No parity (Fixed), Stop bit: 1 (Fixed)
Module location Starter module left side
Field power detection ~14VDC

Environmental

Mounting 35mm DIN rail
Operating temperature -40 ~ 70℃, Degraded performance > 60℃
Storage temperature -40 ~ 85℃
UL temperature -20 ~ 60℃
Relative humidity 5 ~ 90% non-condensing

Digital input module specifications

Indicators 6 LEDs, 1 green / red, module status (MOD), 1 green / red, network status (NET), 1 green / red, PLC Run/Stop status (RUN), 1 green / red, expansion I/O module status (IOS), 1 green, system power status, 1 green, field power Status

Analog input module specifications

Indicators 6 LEDs, 1 green / red, module status (MOD), 1 green / red, network status (NET), 1 green / red, PLC Run/Stop status (RUN), 1 green / red, expansion I/O module status (IOS), 1 green, system power status, 1 green, field power Status

Limited availability

GN-9212

Network adapter


EOL - End Of Life:
-

LTB - Last Time Buy:
-

LTD - Last Time Delivery:
-

LTR - Last Time Repair:
-