GL-9972
GN-9372
GN-9373
GL-9972
Programmable I/O with CODESYS
- Programmable I/O light version
- 1xRJ45 Ethernet 10/100Mbps & 1xRJ45 Serial port
- Up to 63 expansion slices
- Small slice type
- ARTI, OPC UA
- Filesystem, online change and breakpoints
Facts
General description
| Article number | 100-8104 |
| Warranty | 2 year |
| Article status | Active |
| Shock operating | IEC 60068-2-27 (15G) |
| Vibration resistence | Sine vibration (based on IEC 60068-2-6), 5 ~ 25Hz: ±1.6mm, 25 ~ 300Hz: 4G, Sweep rate: 1 octave/min., 20 cycles, Random vibration (based on IEC 60068-2-64), 10 ~ 40Hz: 0.0125g²/Hz, 40 ~ 100Hz: 0.0125 → 0.002g²/Hz, 100 ~ 500Hz: 0.002 g²/Hz, 500 ~ 2000Hz: 0.002 → 1.3 x 10-4g²/Hz, Test time: 1hrs for each test |
| Industrial emissions | EN 61000-6-4/A11: 2011 |
| Industrial immunity | EN 61000-6-2:2005 |
| Installation position | Horisontal, Vertical |
| Product certifications | CE, UL, FCC, RoHS, China RoHS, Reach |
| System power | Nominal supply voltage: 24VDC, Voltage range: 60℃: 18~32VDC, 70℃: 18~26.4VDC, Output current limitation: 1.5A, Reverse polarity protection |
| Power dissipation | Max. 40mA @ 24VDC |
| Current for IO module | 1.5A @ 5VDC |
| Isolation | System power to internal logic: Non-Isolation , System power I/O driver: Isolation |
| Field power | Nominal supply voltage: 24VDC, Voltage range: 60℃: 18~32VDC, 70℃: 18~26.4VDC, * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
| Max current field power contact | DC 8A max |
| Weight | 75g |
| Module size | 22x109x70mm |
Communication
| Station type | Slave |
| Max expansion ports | 63 slices |
| Bus connection | 2 x RJ45 (1xRJ45 Ethernet & 1xRJ45 Serial) |
| Indicator | 6 LEDs, 1 green / red, module status (MOD), 1 green / red, network status (NET), 1 green / red, PLC Run/Stop status (RUN), 1 green / red, expansion I/O module status (IOS), 1 green, system power status, 1 green, field power Status |
| Module location | Starter module left side |
| Field power detection | ~14VDC |
Environmental
| Mounting | 35mm DIN rail |
| Operating temperature | -40 ~ 70℃, Degraded performance > 60℃ |
| Storage temperature | -40 ~ 85℃ |
| UL temperature | -20 ~ 60℃ |
| Relative humidity | 5 ~ 90% non-condensing |
Smart Engineering Resources
Resources
Configuration files
Firmware
Knowledge
- FnIO S-series and G-series , Serial number, Production date
- Shock resistance of G- and M-series (IEC 60068-2-27)
Brochures
Software
- G series, BootP Server for IP-setting at GN-9372 and GN-9289
- CODESYS V3.5 SP11 Patch 3, required for G- and M-series PIOs FW rev 2.xxx
- IO Guide Pro Ver 1_2_0_3 for S- and G-series
- IO Guide Pro 1.4.0.0 beta2
Drawings
- Remote IO serial Modbus RS485 wiring (RTU)
- G- and GL-Series Drawing, 3D / 2D CAD files (Mechanical drawings)
- Remote IO, FnIO-G cad drawings
Product information
Certificates
Limited availability
GL-9972
Programmable I/O with CODESYS
EOL - End Of Life:
-
LTB - Last Time Buy:
-
LTD - Last Time Delivery:
-
LTR - Last Time Repair:
-
Replacement Parts:
